Shown: Oxford/ Black
Unisex Triblend Three-Quarter Raglan Baseball T-Shirt
A blank t-shirt from the JERZEES line, offered in 6 colors and sizes S–M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/37/13 polyester/cotton/rayon at 4.5 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Oxford/ Black
Oxford/ Black
Oxford/ Fiery Red Heather
Oxford/ Indigo Heather
Oxford/ Irish Green Heather
Oxford/ Mint Heather
Oxford/ True Blue Heather
Available sizes
Availability — Oxford/ Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/37/13 polyester/cotton/rayon
- Fabric weight
- 4.5 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–M
- Colors
- 6
- Country of origin
- Honduras, El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–M.
Garment measurements in inches, laid flat.
| Measurement | S | M |
|---|---|---|
| Body Length | 28 | 29 |
| Chest Width (Laid Flat) | 18 | 20 |
| Sleeve Length (From Center Back) | 24 3/4 | 25 3/4 |
Fabric and construction
Manufacturer highlights
- 4.5 oz./yd², 50/37/13 polyester/cotton/rayon
- Pre-shrunk
- Advanced moisture-management properties
- Seamless 1x1 ribbed collar
- Double needle coverstitching on front neck
- Contrast collar
- Side seams
- Double needle hemmed sleeves and bottom
- Tear away label
Country of origin
Made in Honduras or El Salvador.
Shown for the Oxford/ Black colorway; origin can vary by color and production run.
Recommended applications
Similar alternatives
- · Same fabric: 50/37/13 polyester/cotton/rayon
- · Similar weight (4.5 vs 4.5 oz)
- · Similar fiber mix
- · Similar weight (4.3 vs 4.5 oz)
- · Covers XS–3XL
- · Similar fiber mix
- · Similar weight (4.2 vs 4.5 oz)
- · Covers XS–3XL
- · Similar fiber mix
- · Similar weight (4.9 vs 4.5 oz)
- · Covers XS–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Ringer collar
- A ringer collar is the contrast-color ribbed trim around the neckline, and often cuffs, of a ringer tee, a retro style that adds a second color for free.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.