Shown: Charcoal Grey
Men's Easy Care™ Piqué Polo
A blank polo from the JERZEES line, offered in 4 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 65/35 polyester/ringspun cotton piqu at 5.3 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Charcoal Grey
Charcoal Grey
Forest Green
True Red
Deep Purple
Available sizes
Availability — Charcoal Grey
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/ringspun cotton piqu
- Fabric weight
- 5.3 oz/yd²
- Fabric type
- piqué
- Yarn
- ring-spun
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–4XL
- Colors
- 4
- Country of origin
- Egypt
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|
| Body Length | 29 | 30 | 34 | 35 | 36 |
| Chest Width (Laid Flat) | 19 | 21 | 29 | 30 | 31 |
| Sleeve Length (From Center Back) | 17 | 19 | 23 | 24 | 25 |
Fabric and construction
Manufacturer highlights
- 5.3 oz./yd², 65/35 polyester/ringspun cotton piqué
- Durable, wrinkle resistant piqué fabric
- Minimal shrinkage
- Advanced moisture management performance
- Welt knit collar and sleeve bands
- Three dyed-to-match buttons on a reinforced placket
- Double-needle stitched bottom hem
- Sewn-in label
Country of origin
Made in Egypt.
Shown for the Charcoal Grey colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (5 vs 5.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5.3 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Wrinkle Resistance
- Wrinkle resistance is a fiber blend or chemical finish that keeps fabric from creasing, letting shirts come off the shelf looking pressed and stay that way.
- Shrinkage
- Shrinkage is how much a garment tightens after washing and drying — untreated cotton can lose up to 5% in length, preshrunk fabric less.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.