Shown: Black/ White
Devon & JonesStyle DG20C · Polos
Men's CrownLux Performance® Plaited Tipped Polo
A blank polo from the Devon & Jones line, offered in 5 colors and sizes L–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 polyester/cotton back at 5 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black/ White
Black/ White
Burgundy/ White
French Blue/ White
Graphite/ White
Navy/ White
Available sizes
Availability — Black/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 polyester/cotton back
- Fabric weight
- 5 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- L–4XL
- Colors
- 5
- Country of origin
- Egypt
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes L–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 29 | 30 | 31 | 32 | 33 | 34 | 34 1/2 |
| Chest Width (Laid Flat) | 20 1/2 | 22 | 23 1/2 | 25 1/2 | 27 | 29 | 31 |
| Sleeve Length | 18 3/4 | 19 3/8 | 20 | 20 5/8 | 21 1/4 | 21 7/8 | 22 1/2 |
Fabric and construction
Manufacturer highlights
- Active fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- UPF 15-39 protection
- Matching flat-knit collar with contrast double tipping
- Three-button placket
- Dyed-to-match buttons
- Side vents
- Responsible Supplier: this product was made in a facility that is FLA certified
About this blank
5 oz./yd² / 172 gsm, 100% polyester face plaited to 60/40 polyester/cotton back (total overall garment 61/39 polyester/cotton)
Proprietary dual-sided mesh pique knit constructed of fine denier wicking polyester on the outside and soft-as-cotton wicking blend on the inside
Country of origin
Made in Egypt.
Shown for the Black/ White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 60/40 polyester/cotton back
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Same fabric: 60/40 polyester/cotton back
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Same fabric: 60/40 polyester/cotton back
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Same fabric: 60/40 polyester/cotton back
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Flat-knit collar
- A flat-knit collar is a separately knitted collar attached to a polo shirt as its own piece, giving a firmer stand-up shape than a cut-and-sewn collar.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.