Shown: Athletic Heather
Unisex Ultimate CVC Hooded Sweatshirt
A blank hooded sweatshirt from the JERZEES line, offered in 15 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing and embroidery
- 60/40 cvc ring-spun cotton/polyester at 7.6 oz/yd²
- US-grown / BCI cotton
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 15— Athletic Heather
Athletic Heather
Black Ink
Black Ink Heather
Blush Pink
Celery Juice
Indigo Heather
J. Navy
Military Green Heather
Orchid
Putty
Rock
Royal
Soul Blue Heather
True Red
White
Available sizes
Availability — Athletic Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | Inventory Unavailable | — | |
| L | Inventory Unavailable | — | |
| XL | Inventory Unavailable | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cvc ring-spun cotton/polyester
- Fabric weight
- 7.6 oz/yd²
- Fabric type
- jersey
- Yarn
- ring-spun
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 15
- Country of origin
- Honduras, El Salvador
- Sustainability
- US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 32 | 33 |
| Chest Width (Laid Flat) | 20 | 22 | 24 | 26 | 28 | 30 | 32 |
| Sleeve Length (From Center Back) | 34 1/2 | 35 1/2 | 36 1/2 | 37 1/2 | 38 1/2 | 39 | 39 1/2 |
Fabric and construction
Manufacturer highlights
- 7.6 oz./yd², 12.7 oz./L yd (CA), 60/40 CVC ring-spun cotton/polyester
- Made with sustainably-sourced USA-grown cotton
- Pre-shrunk
- Moisture-management properties
- Wrinkle release
- High stitch density
- 2-ply jersey-lined hood with grommets
- Matching tipped and knotted drawcord
- Two-needled coverstitched neck, armholes, and waistband
- Pouch pocket
- 1x1 ribbed cuffs and waistband
- Tear away label
Country of origin
Made in Honduras or El Salvador.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
- Schools and teams →
Performance knit in 15 team colors.
Similar alternatives
- · Similar fiber mix
- · Similar weight (8 vs 7.6 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (8 vs 7.6 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (8 vs 7.6 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (7.5 vs 7.6 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Stitch density
- Stitch density is how tightly embroidery stitches are packed per area, typically set as row spacing between roughly 0.3mm and 0.6mm, controlling both appearance and fabric hand.
- Lined Hood (Two-Ply Hood)
- A lined hood is a hoodie hood built from two fabric layers instead of one, adding warmth, structure, and a hidden inner surface for contrast color or print.
- Grommet (Eyelet)
- A grommet, or eyelet, is the metal or sewn ring set into fabric where a drawcord passes through, a small hardware detail that signals a higher-quality hoodie build.