Shown: Cement
J. AmericaStyle 8913 · Hoodies
Women's Zen Fleece Full-Zip Hooded Sweatshirt
A blank hooded sweatshirt from the J. America line, offered in 5 colors and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/45 cotton/polyester burnout fabric at 7 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Cement
Cement
Dark Smoke
Oceanberry
Twisted Black
Very Berry
Available sizes
Availability — Cement
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | Limited | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/45 cotton/polyester burnout fabric
- Fabric weight
- 7 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–2XL
- Colors
- 5
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 22 | 23 | 24 | 25 | 26 | 27 |
| Chest Width (Laid Flat) | 16 1/2 | 17 1/2 | 18 1/2 | 19 1/2 | 20 1/2 | 21 1/2 |
| Sleeve Length (From Center Back) | 32 | 33 | 34 | 35 | 36 | 37 |
Fabric and construction
Manufacturer highlights
- 7 oz./yd², 55/45 cotton/polyester burnout fabric
- Acid washed with silicone finish
- Flatlock stitching throughout
- Set-in sleeves with extra-long cuffs
- Dyed-to-match drawcord
- Antique brass concealed zipper
- Split-pouch pockets
- 2x1 ribbed waistband
- Raw-edge hood opening, pocket seams, cuffs, waistband, zipper placket and side seams
About this blank
J. America Zen Fabric is a specialty product that undergoes a variety of processes to create its unique and textured look. As a result, the finished garments will shed a portion of their darker fibers, becoming noticeably lighter in shade after the initial laundry cycles. For best results, please wash and dry separately, following label instructions, for the initial launderings. Significant lint build up in the dryer is normal in the initial laundry cycles and can be avoided by hanging to dry.
Country of origin
Made in China.
Shown for the Cement colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 55/45 cotton/polyester burnout fabric
- · Similar weight (7 vs 7 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.1 vs 7 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 7 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 7 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Burnout Fabric
- Burnout fabric is a poly-cotton blend chemically treated to dissolve the cotton in a pattern, leaving a sheer, worn-in look prized for vintage tees.
- Acid Wash
- Acid wash is a finishing process where pumice stones soaked in chlorine bleach tumble against garments, creating the high-contrast mottled fade of '80s denim.
- Silicone Finish
- A silicone finish is a softener applied during wet processing that bonds a lubricating layer to cotton fibers, giving premium tees their slick, buttery hand.
- Flatlock Seam
- A flatlock seam joins two fabric edges by overlapping and stitching them flat, with no raised ridge on either side, common on athletic and performance garments.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.