Shown: Almond
J. AmericaStyle 8761 · Sweatshirts
Unisex Element Fleece Crewneck Sweatshirt
A blank crewneck sweatshirt from the J. America line, offered in 5 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 90/10 polyester/spandex brushed fleece at 8.3 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Almond
Almond
Black
Grey
Navy
Peacock
Available sizes
Availability — Almond
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 14, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 90/10 polyester/spandex brushed fleece
- Fabric weight
- 8.3 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 5
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 25 | 26 1/2 | 28 | 29 1/2 | 30 1/2 | 31 1/2 |
| Chest Width (Laid Flat) | 20 1/2 | 22 | 23 1/2 | 25 1/2 | 27 1/4 | 29 |
| Sleeve Length (From Center Back) | 33 | 34 | 35 | 36 | 37 | 38 |
Fabric and construction
Manufacturer highlights
- 8.3 oz./yd², 90/10 polyester/spandex brushed fleece
- Cover-stitched throughout
- Textured look fabric
- Self-fabric collar, cuffs, and waistband
- Tear away label
Country of origin
Made in China.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Similar weight (8.3 vs 8.3 oz)
- · Also Excellent for embroidery
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Similar weight (8.3 vs 8.3 oz)
- · Also Excellent for embroidery
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Also Excellent for embroidery
- · Covers S–3XL
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Also Excellent for embroidery
- · Covers S–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Brushed Finish
- A brushed finish uses wire-bristled rollers to lift a thick nap from fabric, most often the inside face of sweatshirt fleece, trapping air for extra warmth and softness.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.