Shown: Electric Jade
J. AmericaStyle 8741 · Sweatshirts
Unisex Electric Fleece Quarter-Zip Sweatshirt
A blank crewneck sweatshirt from the J. America line, offered in 5 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 90/10 polyester/spandex brushed fleece at 6 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Electric Jade
Electric Jade
Electric Midnight
Electric Onyx
Electric Sky
Electric Slate
Available sizes
Availability — Electric Jade
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 90/10 polyester/spandex brushed fleece
- Fabric weight
- 6 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Classic
- Sizes
- S–3XL
- Colors
- 5
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Classic fit, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 25 | 26 1/2 | 28 | 29 1/2 | 30 1/2 | 31 1/2 |
| Chest Width (Laid Flat) | 20 1/2 | 22 | 23 1/2 | 25 1/2 | 27 1/4 | 29 |
| Sleeve Length (From Center Back) | 33 | 34 | 35 | 36 | 37 | 38 |
Fabric and construction
Manufacturer highlights
- 6 oz./yd², 90/10 polyester/spandex brushed fleece
- Classic fit
- Unconcealed metal zipper
- Welt pockets
- Self-fabric cuffs and bottom hem
- Tear away label
About this blank
Due to the unique fabric knitting of this garment, it is typical to see color and shade differences. Variations may occur in each individual item.
Country of origin
Made in China.
Shown for the Electric Jade colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Similar weight (6 vs 6 oz)
- · Classic fit
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Also Excellent for embroidery
- · Covers S–3XL
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Also Excellent for embroidery
- · Covers S–3XL
- · Same fabric: 90/10 polyester/spandex brushed fleece
- · Also Excellent for embroidery
- · Covers S–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Brushed Finish
- A brushed finish uses wire-bristled rollers to lift a thick nap from fabric, most often the inside face of sweatshirt fleece, trapping air for extra warmth and softness.
- Classic Fit
- Classic fit is the roomy, straight-cut 'full cut' T-shirt silhouette with generous body ease and minimal waist taper, built to fit the broadest range of body types.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.