Shown: Black Triblend
J. AmericaStyle 8433 · More Styles
Women’s Omega Stretch Quarter-Zip Pullover
A blank garment from the J. America line, offered in 3 colors and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 51/43/6 rayon/polyester/elastane sueded heathered performance at 8 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black Triblend
Black Triblend
Charcoal Triblend
Royal Triblend
Available sizes
Availability — Black Triblend
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 51/43/6 rayon/polyester/elastane sueded heathered performance
- Fabric weight
- 8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Not stated
- Fit
- Not stated
- Sizes
- S–2XL
- Colors
- 3
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL |
|---|---|---|---|---|---|
| Body Length | 25 | 26 | 27 | 28 | 29 |
| Chest Width (Laid Flat) | 19 1/2 | 20 1/2 | 21 1/2 | 22 1/2 | 24 1/2 |
| Sleeve Length (From Center Back) | 33 | 34 | 35 | 36 | 37 |
Fabric and construction
Manufacturer highlights
- 8 oz./yd², 51/43/6 rayon/polyester/elastane sueded heathered performance fabric
- Four-way stretch fabric with striped loop back yarns
- Set-in sleeves
- Self-fabric collar, cuffs and waistband
- Side gusset and hand pockets
- Extended back hem
- Thumbhole on cuffs
Country of origin
Made in China.
Shown for the Black Triblend colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 51/43/6 rayon/polyester/elastane sueded heathered performance
- · Similar weight (8 vs 8 oz)
- · Also Excellent for embroidery
- · Similar weight (8 vs 8 oz)
- · Also Excellent for embroidery
- · Covers XS–4XL
- · Similar weight (8.1 vs 8 oz)
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar weight (7.6 vs 8 oz)
- · Also Excellent for embroidery
- · Covers XS–2XL
Terms used on this page
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.