Shown: Black
Independent Trading Co.Style PRM90 · Hoodies
Unisex Sherpa-Lined Hooded Sweatshirt
A blank hooded sweatshirt from the Independent Trading Co. line, offered in 4 colors and sizes XS–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 70/30 ring spun cotton/polyester blend french terry at 7.5 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black
Black
Charcoal Heather
Navy Heather
Salt & Pepper
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Low Stock | — | |
| XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70/30 ring spun cotton/polyester blend french terry
- Fabric weight
- 7.5 oz/yd²
- Fabric type
- french terry
- Yarn
- ring-spun · 32 singles
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–XL
- Colors
- 4
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured french terry surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat french terry surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 24 1/2 | 26 | 27 1/2 | 29 1/2 | 30 1/2 | 31 1/2 |
| Chest Width (Laid Flat) | 19 1/2 | 20 1/2 | 21 1/2 | 22 1/2 | 23 1/2 | 24 1/2 |
| Sleeve Length (From Center Back) | 31 3/4 | 33 1/4 | 34 3/4 | 36 1/4 | 37 1/2 | 38 3/4 |
Fabric and construction
Manufacturer highlights
- 7.5 oz./yd² (US) 12.5 oz./L yd (CA), 70/30 ring spun cotton/polyester blend French terry, 32 singles
- Pre-laundered
- Unisex fit
- Split stitch double needle sewing
- 1x1 ribbing at cuffs & waistband
- Antique nickel eyelets with antique nickel tipped flat drawcord
- Two drawcords (1-dyed-to-match & 1-Natural)
- #5 antique nickel exposed zipper
- Media pocket & eyelet in front pocket
- Thumbhole on cuffs
- Twill neck tape
- Tear away label
About this blank
4.7 oz./yd² (US) 7.8 oz./L yd (CA), 100% polyester sherpa lined interior (The two fabrics, fleece and Sherpa lining are NOT bonded together)
Country of origin
Made in China.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (8 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 7.5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- French Terry
- French terry is a midweight knit with uncut interior loops instead of a brushed nap, used for lightweight sweatshirts, joggers, and crewnecks.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Unisex Fit
- Unisex fit is the straight-cut, non-tapered T-shirt silhouette built on a men's block and graded to a single size chart worn by any customer.
- Rib Knit
- Rib knit is a knit fabric of alternating vertical ridges that stretches and recovers far more than jersey, used for collars, cuffs, and waistbands.