Shown: Athletic Heather/ Black
HollowayStyle 229279 · Hoodies
Youth Cotton/Poly Fleece Banner Hooded Sweatshirt
A blank hooded sweatshirt from the Holloway line, offered in 6 colors and sizes S–L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 polyester/cotton fleece at 9 oz/yd²
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Athletic Heather/ Black
Athletic Heather/ Black
Black/ Athletic Heather
Navy/ Athletic Heather
Red/ Athletic Heather
Red/ Black
Royal/ Athletic Heather
Available sizes
Availability — Athletic Heather/ Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 polyester/cotton fleece
- Fabric weight
- 9 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- S–L
- Colors
- 6
- Country of origin
- Currently unavailable
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes S–L.
Garment measurements in inches, laid flat.
| Measurement | S | M | L |
|---|---|---|---|
| Body Length | 5 1/8 | 5 5/8 | 6 1/8 |
Fabric and construction
Manufacturer highlights
- 9 oz./yd²., 50/50 polyester/cotton fleece
- Adjustable drawcord hood that is fully lined
- Raglan sleeves
- Front pouch pocket
- Rib-trim cuffs and bottom hem
Country of origin
Made in Currently unavailable.
Shown for the Black/ Athletic Heather colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8.5 vs 9 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Raglan Sleeve
- A raglan sleeve is cut in one piece with the shoulder, creating a diagonal seam from underarm to collar instead of a rounded shoulder seam.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.