Shown: Birch
HollowayStyle 222698 · Hoodies
Youth Eco Revive™ Ventura Soft Knit Hooded Sweatshirt
A blank hooded sweatshirt from the Holloway line, offered in 11 colors and sizes S–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 89/11 recycled polyester/spandex at 6.3 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Birch
Birch
Black
Carbon Heather
Dark Green
Grey Heather
Maroon
Navy
Olive
Royal
Scarlet
Storm
Available sizes
Availability — Birch
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Low Stock | — | |
| L | Limited | — | |
| XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 89/11 recycled polyester/spandex
- Fabric weight
- 6.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Tagless
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- S–XL
- Colors
- 11
- Country of origin
- Egypt
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes S–XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL |
|---|---|---|---|---|
| Body Length Front | 23 | 23 3/4 | 24 1/2 | 25 1/4 |
| Chest Circumference | 27 | 31 | 35 | 39 |
| Sleeve Length | 25 | 27 | 29 | 30 |
Fabric and construction
Manufacturer highlights
- 6.3 oz./yd², 89/11 recycled polyester/spandex
- Moisture wicking
- 3 panel hood
- Side seam pockets
- Set-in sleeves
- Self-fabric cuffs and bottom hem
- Tagless label
- Responsible Materials: contains 89% recycled polyester
Country of origin
Made in Egypt.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 89/11 recycled polyester/spandex
- · Similar weight (6.3 vs 6.3 oz)
- · Also Excellent for embroidery
- · Similar weight (6.8 vs 6.3 oz)
- · Also Excellent for embroidery
- · Covers S–XL
- · Similar weight (5.9 vs 6.3 oz)
- · Also Excellent for embroidery
- · Covers S–XL
- · Similar weight (6.5 vs 6.3 oz)
- · Also Excellent for embroidery
- · Covers XS–XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.