Shown: Harbor Mist
Men's Atoll Half-Zip Hooded Pullover
A blank hooded sweatshirt from the HUK line, offered in 3 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 88/12 polyester/spandex at 4.6 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Harbor Mist
Harbor Mist
Moss
Windsurfer
Available sizes
Availability — Harbor Mist
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 polyester/spandex
- Fabric weight
- 4.6 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 3
- Country of origin
- Guatemala
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 1/2 | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 |
| Chest Circumference | 40 1/2 | 43 1/2 | 46 1/2 | 49 1/2 | 53 1/2 | 57 1/2 |
| Sleeve Length | 33 1/2 | 34 1/2 | 35 1/2 | 36 1/2 | 37 | 37 1/2 |
Fabric and construction
Manufacturer highlights
- 4.6 oz./yd², 88/12 polyester/spandex
- Moisture-wicking performance
- UPF 50+ protection
- Anti-microbial properties
- Raglan sleeves
- Flatlock stitching
- Stealth thumbhole on cuffs
- HUK branding on left bicep
About this blank
Re-selling HUK products from an unauthorized retail store, website or third party marketplace (ie .Amazon, eBay, WalMart, etc.) is strictly prohibited. Failure to comply with these policies will result in loss of privileges in selling this brand
Country of origin
Made in Guatemala.
Shown for the Harbor Mist colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 88/12 polyester/spandex
- · Covers XS–3XL
- · Same fabric: 88/12 polyester/spandex
- · Covers S–3XL
- · Same fabric: 88/12 polyester/spandex
- · Covers S–3XL
- · Same fabric: 88/12 polyester/spandex
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Raglan Sleeve
- A raglan sleeve is cut in one piece with the shoulder, creating a diagonal seam from underarm to collar instead of a rounded shoulder seam.
- Flatlock Seam
- A flatlock seam joins two fabric edges by overlapping and stitching them flat, with no raised ridge on either side, common on athletic and performance garments.