Shown: Athletic Grey
HollowayStyle 222140 · More Styles
Men's CoolCore® Quarter-Zip Pullover
A blank garment from the Holloway line, offered in 12 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 88/12 polyester/elastane at 4.4 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 12— Athletic Grey
Athletic Grey
Black
Columbia Blue
Dark Green
Iron
Maroon
Navy
Olive
Purple
Royal
Scarlet
White
Available sizes
Availability — Athletic Grey
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Inventory Unavailable | — | |
| M | In Stock | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Inventory Unavailable | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 polyester/elastane
- Fabric weight
- 4.4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 12
- Country of origin
- Mexico
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Fabric and construction
Manufacturer highlights
- 4.4 oz./yd², 88/12 polyester/elastane
- Coolcore® fabric with color secure® technology that helps prevent dye migration
- Moisture-wicking performance
- UPF 50+ protection
- Four-way stretch fabric for increased mobility
- Set-in sleeves
- Tagless label
Country of origin
Made in Mexico.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 88/12 polyester/elastane
- · Similar weight (4.4 vs 4.4 oz)
- · Similar weight (4.9 vs 4.4 oz)
- · Covers S–4XL
- · Similar weight (4.5 vs 4.4 oz)
- · Covers XS–4XL
- · Similar weight (4 vs 4.4 oz)
- · Covers XS–5XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Dye Migration
- Dye migration is disperse dye from a polyester garment sublimating into wet ink during curing, turning white ink pink on a red shirt.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.