Shown: Black/ Carbon
HollowayStyle 222591 · More Styles
Men's Dry-Excel™ Prism Bold Quarter-Zip Pullover
A blank garment from the Holloway line, offered in 11 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4.8 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Black/ Carbon
Black/ Carbon
Black/ Gold
Black/ Orange
Black/ Scarlet
Black/ White
Carbon/ White
Maroon/ White
Navy/ Gold
Navy/ White
Royal/ White
Scarlet/ White
Available sizes
Availability — Black/ Carbon
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 11
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 | 28 3/4 | 29 1/2 | 30 1/4 | 31 | 31 3/4 |
| Chest Circumference | 38 1/2 | 42 1/2 | 46 1/2 | 50 1/2 | 54 1/2 | 58 1/2 |
| Sleeve Length | 35 | 35 3/4 | 36 1/2 | 37 1/4 | 38 | 38 3/4 |
Fabric and construction
Manufacturer highlights
- 4.8 oz./yd², 100% polyester Dry-Excel™ wicking honeycomb knit
- Moisture-wicking performance
- UPF 50+ protection
- Weld tape accent at chest
- Set-in sleeves
- Open bottom
- Tagless label
Country of origin
Made in China.
Shown for the Black/ White colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.8 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.8 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.8 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.7 vs 4.8 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.