Shown: Black
Men's Maverick CVC Pique Polo
A blank polo from the Harriton line, offered in 6 colors in size M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 cotton/polyester pique at 5 oz/yd²
- Fair Labor Association
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Black
Black
Dark Navy
Red
Sunray Yellow
True Royal
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/polyester pique
- Fabric weight
- 5 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- M
- Colors
- 6
- Country of origin
- Pakistan
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes M.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | 2XL | 4XL |
|---|---|---|---|---|---|
| Body Length Back | 28 1/2 | 29 1/2 | 30 1/2 | 32 1/2 | 34 |
| Chest Width (Laid Flat) | 21 1/2 | 22 | 23 1/2 | 27 | 31 |
Fabric and construction
Manufacturer highlights
- 5 oz/yd² (US), 8.4 oz/L yd (CA), 60/40 cotton/polyester pique
- UPF 15-39 protection
- Matching knit collar
- Three-button placket
- Side vents
- Tear away label
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Pakistan.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Workwear-grade construction.
Similar alternatives
- · Same fabric: 60/40 cotton/polyester pique
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Same fabric: 60/40 cotton/polyester pique
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5.5 vs 5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.