Shown: Navy
Men's Micro Piqué Polo
A blank polo from the Harriton line, offered in 3 colors and sizes L–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 3.8 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Navy
Navy
Red
True Royal
Available sizes
Availability — Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| L | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — | |
| 4XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 3.8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- L–4XL
- Colors
- 3
- Country of origin
- Viet Nam
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes L–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 28 1/4 | 29 1/4 | 30 1/4 | 31 1/4 | 32 3/4 | 33 3/4 | 34 3/4 |
| Chest Width (Laid Flat) | 19 1/2 | 21 | 22 1/2 | 24 | 27 | 29 | 31 |
| Sleeve Length | 18 | 19 | 20 | 21 | 22 | 22 1/2 | 23 |
Fabric and construction
Manufacturer highlights
- 3.8 oz./yd², 100% polyester
- Moisture-management
- Snag-resistant
- Ribbed collar
- Panel inserts along sleeves
- Double-needle stitching on sleeves and bottom hem
- Two-button placket
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Viet Nam.
Shown for the Navy colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Workwear-grade construction.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4 vs 3.8 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4 vs 3.8 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (3.5 vs 3.8 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (3.8 vs 3.8 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Snag Resistance
- Snag resistance describes how well a fabric's yarn resists catching and pulling into a loop when it hooks on velcro, nails, or rough surfaces.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Double-Needle Stitching
- Double-needle stitching sews two parallel rows of lockstitch, usually 1/4 inch apart, along hems and sleeve openings so the seam allowance stays flat and resists unraveling.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.