Shown: Black
Devon & JonesStyle DG20WB · More Styles
Women's CrownLux Performance® Plaited Rolled Sleeve Shirt
A blank garment from the Devon & Jones line, offered in 9 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 polyester/cotton back at 5 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 9— Black
Black
Burgundy
Dark Teal
Forest
Graphite
Navy
Red
True Royal
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Low Stock | — | |
| 3XL | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 polyester/cotton back
- Fabric weight
- 5 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 9
- Country of origin
- Egypt
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 26 1/2 | 27 | 28 | 29 | 30 | 31 | 31 1/2 |
| Chest Width (Laid Flat) | 18 1/2 | 19 1/2 | 20 1/2 | 22 1/2 | 24 1/2 | 26 1/2 | 28 1/2 |
| Sleeve Length | 15 1/4 | 15 3/4 | 16 1/4 | 16 7/8 | 17 1/2 | 18 1/8 | 18 3/4 |
Fabric and construction
Manufacturer highlights
- Active fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- UPF 15-39 protection
- Luxury, comfort and performance in one
- Flattering V-neck with shoulder pleat details
- Stylized open placket
- Decorative roll-up cuff design
- Hi-low hemline
- Side vents
About this blank
5 oz./yd2 / 172 gsm (US), 8.4 oz/Lyd (CA), 100% polyester face plaited to 60/40 polyester/cotton back (total overall garment 61/39 polyester/cotton)
Proprietary dual-sided mesh pique knit constructed of fine denier wicking polyester on the outside and soft-as-cotton wicking blend on the inside
Country of origin
Made in Egypt.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 60/40 polyester/cotton back
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (4.75 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (4.7 vs 5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- V-neck
- A V-neck is a t-shirt collar shaped like a downward-pointing V instead of a round crew, cutting closer to the sternum and narrowing usable chest-print space.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.