Shown: Black/ Carbon
CORE365Style CE418 · More Styles
Men's Origin Performance Pique Quarter-Zip Pullover
A blank garment from the CORE365 line, offered in 6 colors and sizes S–5XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 4 oz/yd²
- 8-size run (S–5XL)
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Black/ Carbon
Black/ Carbon
Carbon/ Black
Classic Navy Heather/ Carbon
Classic Red/ Carbon
Forest/ Carbon
True Royal/ Carbon
Available sizes
Availability — Black/ Carbon
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — | |
| 4XL | Limited | — | |
| 5XL | Limited | — |
Last inventory sync: July 14, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–5XL
- Colors
- 6
- Country of origin
- Bangladesh
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–5XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 | 34 | 34 1/2 |
| Chest Width (Laid Flat) | 20 1/2 | 22 | 23 1/2 | 25 | 26 1/2 | 28 1/2 | 30 1/2 | 32 1/2 |
| Sleeve Length | 33 1/4 | 34 1/4 | 35 1/4 | 36 1/4 | 37 1/4 | 38 1/4 | 38 3/4 | 39 1/4 |
Fabric and construction
Manufacturer highlights
- 4 oz./yd²/139 gsm (US), 6.7 oz./L yd (CA), 100% polyester piqué
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Antimicrobial performance properties fight odor-causing bacteria to keep your gear fresher for longer
- UPF 15-39 protection
- Contrast inner collar
- Coil zipper, contrast teeth and rubber pull
- Reflective piping details
- Tear-away label
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Bangladesh.
Shown for the Black/ Carbon colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (3.5 vs 4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (3.5 vs 4 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.