Shown: Black
Men's Tall Fusion ChromaSoft™ Pique Polo
A blank polo from the CORE365 line, offered in 3 colors and sizes LT–3XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 6 oz/yd²
- Fair Labor Association
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black
Black
Carbon
Classic Navy
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| LT | Limited | — | |
| XLT | Limited | — | |
| 2XLT | Limited | — | |
| 3XLT | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 6 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- LT–3XLT
- Colors
- 3
- Country of origin
- Cambodia
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes LT–3XLT.
Garment measurements in inches, laid flat.
| Measurement | LT | XLT | 2XLT | 3XLT |
|---|---|---|---|---|
| Body Length | 33 | 34 | 34 1/2 | 35 1/2 |
| Chest Width (Laid Flat) | 23 1/2 | 25 | 26 1/2 | 28 |
| Sleeve Length | 21 3/4 | 22 3/4 | 23 1/4 | 24 1/4 |
Fabric and construction
Manufacturer highlights
- 6 oz./yd²/210 gsm (US), 10 oz./L yd (CA), 100% polyester pique
- ChromaSoft™ technology combines the colorfastness of cationic dyes with soft cotton-feel performance
- Antimicrobial performance properties fight odor-causing bacteria to keep your gear fresher for longer
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Active fit
- Three-button placket with self-fabric collar and integrated collar stays
- Side vents
- Dyed-to-match buttons
- Tear-away label
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Cambodia.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (6 vs 6 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (6 vs 6 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (5.64 vs 6 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (6.5 vs 6 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Colorfastness
- Colorfastness is a garment's resistance to fading or transferring color from washing, sunlight, rubbing, or sweat, scored on standardized gray scales from 1 to 5.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.