Shown: Black
Women's Radiant Performance Piqué Polo with Reflective Piping
A blank polo from the CORE365 line, offered in 5 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 4 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black
Black
Classic Navy
Classic Red
Safety Yellow
True Royal
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 5
- Country of origin
- Bangladesh
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 24 | 24 3/4 | 25 1/2 | 26 1/4 | 27 | 27 3/4 | 27 3/4 |
| Chest Width (Laid Flat) | 17 1/2 | 18 1/2 | 19 1/2 | 21 | 22 1/2 | 24 | 25 1/2 |
| Sleeve Length | 15 | 15 1/2 | 16 | 16 5/8 | 17 1/4 | 17 7/8 | 18 1/2 |
Fabric and construction
Manufacturer highlights
- 4 oz./yd²/139 GSM (US), 6.7 oz./L yd (CA), 100% polyester pique
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Antimicrobial performance properties fight odor-causing bacteria to keep your gear fresher for longer
- UPF 15-39 protection
- Matching flat-knit collar
- Reflective piping at front and back for 360 degree visibility
- Side slits
- Heat-sealed label
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Bangladesh.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Flat-knit collar
- A flat-knit collar is a separately knitted collar attached to a polo shirt as its own piece, giving a firmer stand-up shape than a cut-and-sewn collar.