Shown: Black
Chef DesignsStyle 0P2M · Bottoms
Airflow Chef Pants with Back Panels
A blank garment from the Chef Designs line, offered in 2 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 77/23 polyester/cotton plain weave at 5.75 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Black
Black
Grey/ Black Plaid
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 28, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 77/23 polyester/cotton plain weave
- Fabric weight
- 5.75 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Not stated
- Fit
- Relaxed
- Sizes
- S–3XL
- Colors
- 2
- Country of origin
- Not stated
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Inseam | 31 1/2 | 31 1/2 | 31 1/2 | 31 1/2 | 31 1/2 | 31 1/2 |
| Waist Extended | 40 3/4 | 44 3/4 | 48 3/4 | 52 3/4 | 56 3/4 | 60 3/4 |
| Waist Relaxed | 26 | 28 1/2 | 31 | 33 1/2 | 36 | 38 1/2 |
Fabric and construction
Manufacturer highlights
- 5.75 oz./yd², 77/23 polyester/cotton plain weave
- 3.5 oz./yd², 100% polyester stretch woven panels behind each knee
- Relaxed fit
- Moisture wicking and soil release
- Elastic waistband with internal drawcord
- Zipper closure
- Two front pockets, two back patch pockets, and cell phone pocket on right leg
- Wash care: home wash
About this blank
WARNING:This Product can expose you To chemicals including Toluene which Is/are known To the State Of California To cause cancer And/Or birth defects And other reproductive harm. For more information, go towww.P65Warnings.ca.gov
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
- Hospitality →
Built for kitchen and front-of-house programs.
Similar alternatives
- · Same fabric: 77/23 polyester/cotton plain weave
- · Similar weight (5.75 vs 5.75 oz)
- · Also Excellent for embroidery
- · Same fabric: 77/23 polyester/cotton plain weave
- · Similar weight (5.75 vs 5.75 oz)
- · Also Excellent for embroidery
- · Similar weight (6 vs 5.75 oz)
- · Also Excellent for embroidery
- · Covers XS–4XL
- · Relaxed fit
- · Also Excellent for embroidery
- · Covers XS–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Plain weave
- Plain weave is the simplest weave structure, alternating each weft thread over and under each warp thread to make a tight, stable, balanced fabric.
- Relaxed Fit
- Relaxed fit adds extra ease through the chest and body beyond a classic cut, without going as wide or long as an oversized silhouette.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Ribbed Waistband
- A ribbed waistband is the stretch rib-knit band at the bottom of a hoodie that controls fit at the hips and keeps the hem from riding up.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.