Shown: Charcoal Heather
BoxercraftStyle BW2103 · Sweatshirts
Women's French Terry Short Sleeve Cropped Crewneck Sweatshirt
A blank crewneck sweatshirt from the Boxercraft line, offered in 3 colors and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 70/30 cotton/polyester french terry at 8.3 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Charcoal Heather
Charcoal Heather
Navy Heather
Oxford Heather
Available sizes
Availability — Charcoal Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Low Stock | — | |
| S | Limited | — | |
| M | In Stock | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70/30 cotton/polyester french terry
- Fabric weight
- 8.3 oz/yd²
- Fabric type
- french terry
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Relaxed
- Sizes
- XS–2XL
- Colors
- 3
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured french terry surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat french terry surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit, cut for women's wear · sizes XS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 17 | 18 | 19 | 20 | 21 | 22 |
| Chest Width (Laid Flat) | 17 1/2 | 18 1/2 | 19 1/2 | 20 1/2 | 21 1/2 | 22 1/2 |
| Sleeve Length | 9 | 9 1/2 | 10 | 10 1/2 | 11 | 12 1/2 |
Fabric and construction
Manufacturer highlights
- 8.3 oz./yd², 70/30 cotton/polyester French Terry
- Relaxed fit
- Raglan cap sleeves
- Cropped, cinched waistline
Country of origin
Made in China.
Shown for the Charcoal Heather colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (8.3 vs 8.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8.3 vs 8.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 8.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8.11 vs 8.3 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- French Terry
- French terry is a midweight knit with uncut interior loops instead of a brushed nap, used for lightweight sweatshirts, joggers, and crewnecks.
- Relaxed Fit
- Relaxed fit adds extra ease through the chest and body beyond a classic cut, without going as wide or long as an oversized silhouette.
- Cap Sleeve
- A cap sleeve is a short sleeve that covers just the top of the shoulder without extending past the upper arm, common on ladies' fashion tees.