Shown: Frosty Grey
BoxercraftStyle FZ03 · Sweatshirts
Women's Fuzzy Crewneck Fleece
A blank crewneck sweatshirt from the Boxercraft line, offered in Frosty Grey and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 8.8 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Frosty Grey
Frosty Grey
Available sizes
Availability — Frosty Grey
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 8.8 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 1
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 23 | 24 1/2 | 25 1/2 | 26 1/2 | 27 1/2 | 29 | 30 1/2 |
| Chest Width (Laid Flat) | 19 1/2 | 21 | 22 | 23 | 24 | 25 1/2 | 27 |
| Sleeve Length | 23 1/2 | 24 | 24 1/2 | 25 | 25 1/2 | 26 | 26 1/2 |
Fabric and construction
Manufacturer highlights
- 8.8 oz./yd², 100% Polyester Fuzzy Fleece
- Rib neck band
- Rib sleeve cuffs
- Slight high low hem
- Side vents
- Woven patch label
About this blank
Boxercraft products purchased from us must be sold with embellishment, Re-selling from an unauthorized retail store, website, or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited and must adhere to Boxercraft’s M.A.P (Minimum Advertised Pricing) policy. Failure to comply will result in loss of privilege to sell the Boxercraft brand.
Country of origin
Made in China.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers XS–4XL
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers XS–2XL
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Neckband
- A neckband is the ribbed strip of fabric sewn around a tee's neck opening to finish the raw edge and hold the collar's shape.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- High-Low Hem
- A high-low hem is a shirt bottom cut shorter in front and longer in back, a fashion-fit detail common on women's flowy tees and tanks.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.