Shown: Alpine Green
Berne ApparelStyle SZ101 · Hoodies
Men's Heritage Thermal Lined Hooded Sweatshirt
A blank hooded sweatshirt from the Berne Apparel line, offered in 7 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 cotton/polyester fleece at 9 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 7— Alpine Green
Alpine Green
Black
Charcoal
Dark Brown
Green
Navy
Realtree Apx
Available sizes
Availability — Alpine Green
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Inventory Unavailable | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/polyester fleece
- Fabric weight
- 9 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Oversized
- Sizes
- S–4XL
- Colors
- 7
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Oversized fit, cut for men's wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 28 | 29 | 30 | 31 | 32 | 33 | 34 |
| Chest Width (Laid Flat) | 20 1/2 | 22 1/2 | 24 1/2 | 26 1/2 | 28 1/2 | 30 1/2 | 32 1/2 |
| Sleeve Length | 36 | 36 3/4 | 37 1/2 | 38 1/4 | 39 | 39 3/4 | 40 1/2 |
Fabric and construction
Manufacturer highlights
Country of origin
Made in Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 60/40 cotton/polyester fleece
- · Similar weight (9 vs 9 oz)
- · Oversized fit
- · Same fabric: 60/40 cotton/polyester fleece
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Same fabric: 60/40 cotton/polyester fleece
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Nylon
- Nylon is a synthetic fiber known for strength and a slick, low-friction surface, common in jackets and bags, that requires specialized inks or transfers to hold a print.