Shown: Black
Berne ApparelStyle SP401T · Hoodies
Men's Tall Signature Sleeve Hooded Sweatshirt
A blank hooded sweatshirt from the Berne Apparel line, offered in Black and sizes MT–2XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 cotton/polyester fleece at 9 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
- ⚠ Only 0 of 1 colors in stock at last sync.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Black
Blackout of stock
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| MT | Out of Stock | — | |
| LT | Out of Stock | — | |
| XLT | Out of Stock | — | |
| 2XLT | Out of Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/polyester fleece
- Fabric weight
- 9 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- MT–2XLT
- Colors
- 1
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes MT–2XLT.
Garment measurements in inches, laid flat.
| Measurement | MT | LT | XLT | 2XLT |
|---|---|---|---|---|
| Body Length | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 |
| Chest Width (Laid Flat) | 24 | 26 | 28 | 30 |
| Sleeve Length (From Center Back) | 38 | 39 | 40 | 41 |
Fabric and construction
Manufacturer highlights
- 9 oz./yd²., 60/40 cotton/polyester fleece
- Three-piece hood with drawstring
- Rib-knit cuffs and waistband
- Double-needle stitched main seams
- Front pouch pocket
Country of origin
Made in Pakistan.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 60/40 cotton/polyester fleece
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Same fabric: 60/40 cotton/polyester fleece
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Same fabric: 60/40 cotton/polyester fleece
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.