Shown: Black/ White Camo
Youth Camo Sport T-Shirt
A blank t-shirt from the Badger line, offered in 17 colors and sizes XS–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 17— Black/ White Camo
Black/ White Camo
Burnt Orange/ Burnt Orange Camo
Columbia Blue/ Columbia Blue Camo
Forest/ Forest Camo
Gold/ Gold Camo
Graphite/ White Camo
Lime/ Lime Camo
Maroon/ Maroon Camo
Navy/ Navy Camo
Purple/ Purple Camo
Red/ Red Camo
Royal/ Royal Camo
Silver/ Black Camo
White/ Navy Camo
White/ Red Camo
White/ Royal Camo
White/ White Camo
Available sizes
Availability — Black/ White Camo
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- Not stated
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- XS–XL
- Colors
- 17
- Country of origin
- China, Nicaragua
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes XS–XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Body Length | 21 | 23 | 25 | 26 | 27 |
| Chest Width (Laid Flat) | 15 | 16 | 17 | 18 | 19 |
Fabric and construction
Manufacturer highlights
- 100% polyester moisture-management/antimicrobial performance fabric
- Badger Sport paneled shoulder for maximum movement
- Sublimated shoulder panels and sleeves
- Self-fabric collar
- Double-needle hem
- Badger heat-seal logo on left sleeve
- Heat transfers are NOT recommended
About this blank
Printing on Sublimated Fabric: Printing over sublimated fabric can be achieved with ease, it’s always best to contact your ink manufacturer before printing. An under base is recommended with all inks. When curing ink do NOT exceed 320 degrees.
Designs: Designs with less fill and darker ink colors work best to block the pattern, lighter inks may allow the digital pattern to show through. Bold lines are recommended, fine lines will disappear into the pattern.
Country of origin
Made in China or Nicaragua.
Shown for the Black/ White Camo colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
- Fitness →
Moisture-management fabric for active wear.
- Schools and teams →
Performance knit in 17 team colors.
Similar alternatives
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers XS–XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers XS–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Underbase
- An underbase is a layer of white (or light) plastisol printed first on dark garments so the colors on top stay bright instead of blending into the fabric.
- Curing
- Curing is heating printed plastisol ink to roughly 320°F for enough time that it fully cross-links into the fabric instead of just drying on the surface.