Shown: Black/ White
Augusta SportswearStyle 9583 · T-Shirts
Youth Slant Football Jersey
A blank t-shirt from the Augusta Sportswear line, offered in 14 colors and sizes S–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 5.5 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 14— Black/ White
Black/ White
Columbia Blue/ White
Dark Green/ White
Gold/ White
Graphite/ Black
Maroon/ White
Navy/ White
Orange/ White
Purple/ White
Red/ Black
Red/ White
Royal/ White
Vegas Gold/ Black
White/ Black
Available sizes
Availability — Black/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Inventory Unavailable | — | |
| M | Low Stock | — | |
| L | Limited | — | |
| XL | Inventory Unavailable | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 5.5 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- S–XL
- Colors
- 14
- Country of origin
- Mexico
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes S–XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL |
|---|---|---|---|---|
| Body Length | 24 3/4 | 26 3/4 | 28 3/4 | 29 3/4 |
| Chest Width (Laid Flat) | 16 1/2 | 18 | 19 1/2 | 21 |
Fabric and construction
Manufacturer highlights
- 5.5 oz./yd², 100% polyester heavyweight tricot mesh body
- 90/10 polyester/spandex 2-ply yoke, sleeves and side inserts
- Updated fit to accommodate traditional and slimmer pads
- V-neck collar with center front insert
- Contrast color cap sleeves with contrast color half-elastic cuffs for secure fit over pads
- Outside locker label
Country of origin
Made in Mexico.
Shown for the White/ Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (5 vs 5.5 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers XS–XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers XS–XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers XS–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Tricot
- Tricot is a warp-knit fabric with diagonal interlocking loops that resist runs and unraveling, common in jacket linings, warmups, and moisture-wicking layers.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Yoke
- A yoke is the separate fabric panel seamed across a shirt's upper back, and where that seam sits sets how low a back print can start.
- V-neck
- A V-neck is a t-shirt collar shaped like a downward-pointing V instead of a round crew, cutting closer to the sternum and narrowing usable chest-print space.