Shown: Black/ Gold
Augusta SportswearStyle 1661 · T-Shirts
Youth Slugger Jersey
A blank t-shirt from the Augusta Sportswear line, offered in 11 colors and sizes S–L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Black/ Gold
Black/ Gold
Black/ White
Dark Green/ White
Navy/ Red
Navy/ White
Orange/ Black
Red/ Black
Royal/ Red
Royal/ White
Silver/ Black
White/ White
Available sizes
Availability — Black/ Gold
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | Low Stock | — | |
| L | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- Not stated
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- S–L
- Colors
- 11
- Country of origin
- Mexico
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes S–L.
Garment measurements in inches, laid flat.
| Measurement | S | M | L |
|---|---|---|---|
| Body Length Front | 21 3/8 | 23 1/8 | 25 1/4 |
| Chest Circumference | 30 | 34 | 38 |
Fabric and construction
Manufacturer highlights
- 100% polyester propelit micromesh wicking knit body
- 92/8 polyester/spandex wicking pinhole mesh side panels and sleeve inserts
- Wicks moisture away from the body
- Pad print label
- Contrast color pinhole mesh side and sleeve inserts
- Contrast color piping on neck, placket, and sleeves
- Set-in sleeves
- Full-button jersey
- Buttons spaced for easy embellishment
- Double-needle hemmed sleeves and fishtail bottom
Country of origin
Made in Mexico.
Shown for the White/ White colorway; origin can vary by color and production run.
Recommended applications
Similar alternatives
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers XS–XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–L
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.