Shown: Birch/ Carbon Heather
Augusta SportswearStyle 6884 · Hoodies
Unisex Gameday Vintage Hooded T-Shirt
A blank hooded sweatshirt from the Augusta Sportswear line, offered in 11 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/38/12 polyester/cotton/rayon at 3.8 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Birch/ Carbon Heather
Birch/ Carbon Heather
Grey Heather/ Carbon Heather
Grey Heather/ Dark Green Heather
Grey Heather/ Maroon Heather
Grey Heather/ Navy Heather
Grey Heather/ Orange Heather
Grey Heather/ Royal Heather
Grey Heather/ Scarlet Heather
Olive Heather/ Carbon Heather
Scarlet Heather/ Carbon Heather
Storm Heather/ Carbon Heather
Available sizes
Availability — Birch/ Carbon Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Low Stock | — | |
| S | Low Stock | — | |
| M | Low Stock | — | |
| L | Low Stock | — | |
| XL | Low Stock | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/38/12 polyester/cotton/rayon
- Fabric weight
- 3.8 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 11
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 3/4 | 28 1/2 | 29 1/4 | 30 | 30 3/4 | 31 1/2 | 32 1/4 |
| Chest Circumference | 34 | 38 | 42 | 46 | 50 | 54 | 58 |
| Sleeve Length (From Center Back) | 32 1/4 | 33 1/2 | 34 3/4 | 36 | 37 1/8 | 38 1/4 | 39 3/8 |
Fabric and construction
Manufacturer highlights
- 3.8 oz./yd², 50/38/12 polyester/cotton/rayon
- Tri-blend jersey
- UPF 15+ protection
- Three-panel crossover hood with X stitching at neckline
- Set-in sleeves with shoulder insert
- Tear away label
Country of origin
Made in China.
Shown for the Birch/ Carbon Heather colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (4.1 vs 3.8 oz)
- · Similar weight (4.1 vs 3.8 oz)
- · Covers XS–4XL
- · Similar weight (3.5 vs 3.8 oz)
- · Covers XS–4XL
- · Similar weight (4.3 vs 3.8 oz)
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Tri-Blend
- Tri-blend fabric mixes cotton, polyester, and rayon in one yarn, producing an especially soft, drapey tee with a naturally heathered, faded print look.
- Scuba hood
- A scuba hood is a snug, unlined hood with an overlapping crossover front, cut from bonded scuba knit instead of a drawstring hood.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.