Shown: Black/ White
Alleson AthleticStyle 754 · T-Shirts
Pro Flex Cut Belt Length Football Jersey
A blank t-shirt from the Alleson Athletic line, offered in 13 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% extreme mesh cationic colorfast polyester
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 13— Black/ White
Black/ White
Charcoal/ White
Forest/ White
Maroon/ White
Navy/ White
Purple/ White
Red/ White
Royal/ White
White/ Black
White/ Navy
White/ Red
White/ Royal
White
Available sizes
Availability — Black/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Inventory Unavailable | — | |
| M | In Stock | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Low Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% extreme mesh cationic colorfast polyester
- Fabric weight
- Not stated
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Not stated
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 13
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 31 1/2 | 31 1/2 | 31 1/2 | 31 1/2 | 31 1/2 | 31 1/2 |
| Chest Width (Laid Flat) | 18 | 19 | 20 | 22 | 24 | 26 |
Fabric and construction
Manufacturer highlights
- 100% eXtreme mesh cationic colorfast polyester, 100 denier tricot mesh with moisture-management properties
- Bottom front and back body are 85/15 polyester/elastane four-way stretch mesh for increased mobility
- Yoke and sleeves are 100% eXtreme dazzle cationic colorfast polyester
- Cuffs and collar are 88/12 polyester/elastane
- Belt length "Pro-Flex Cut" tailored jersey
- Double thickness dazzle "Pro-Flex" yoke and sleeves, with contrast color sleeve inserts
- Top body, front and back are single ply tricot mesh
- 4-way stretch mesh fabric bottom body, front, back and side inserts
- Contrast color Lycra triple bar-tacked set-in mitered V-neck collar
- Cover hemmed Lycra "Pro-Flex cut" sleeve cuffs
- Belt length 3/4" covered elastic hem
- Cover seamed throughout
Country of origin
Made in Pakistan.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
Similar alternatives
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
- · Covers S–2XL
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
- · Covers S–2XL
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
Terms used on this page
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Tricot
- Tricot is a warp-knit fabric with diagonal interlocking loops that resist runs and unraveling, common in jacket linings, warmups, and moisture-wicking layers.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Yoke
- A yoke is the separate fabric panel seamed across a shirt's upper back, and where that seam sits sets how low a back print can start.
- Mitered V-Neck
- A mitered V-neck is a V-neckline whose rib trim is cut and joined at a 45-degree angle so both sides meet in one clean, unbroken point.