
Shown: Forest
Alleson AthleticStyle 703FJ · T-Shirts
Men's Fanwear Football Jersey
A blank t-shirt from the Alleson Athletic line, offered in Forest in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% extreme mesh cationic colorfast polyester
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Forest
Forest
Available sizes
Availability — Forest
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% extreme mesh cationic colorfast polyester
- Fabric weight
- Not stated
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XL
- Colors
- 1
- Country of origin
- Haiti
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XL.
Garment measurements in inches, laid flat.
| Measurement | XL |
|---|---|
| Body Length | 31 |
| Chest Width (Laid Flat) | 25 5/8 |
Fabric and construction
Manufacturer highlights
- 100% eXtreme mesh cationic colorfast polyester, 70 denier tricot mesh with moisture-management
- 100% eXtreme dazzle cationic colorfast polyester
- Full length fanwear football jersey
- Set-in mitered rib V-neck
- Tricot body with single ply dazzle yoke & sleeves
- Open hemmed sleeve ends
- Cover seamed yoke
- Alleson size jock tag
- Not constructed to be worn with pads
Country of origin
Made in Haiti.
Recommended applications
Similar alternatives
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
- · Covers S–2XL
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
- · Covers S–2XL
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
- · Covers S–XL
- · Same fabric: 100% extreme mesh cationic colorfast polyester
- · Also Excellent for sublimation
Terms used on this page
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Tricot
- Tricot is a warp-knit fabric with diagonal interlocking loops that resist runs and unraveling, common in jacket linings, warmups, and moisture-wicking layers.
- V-neck
- A V-neck is a t-shirt collar shaped like a downward-pointing V instead of a round crew, cutting closer to the sternum and narrowing usable chest-print space.
- Yoke
- A yoke is the separate fabric panel seamed across a shirt's upper back, and where that seam sits sets how low a back print can start.