Shown: Navy
US BlanksStyle US2000 · T-Shirts
Men's T-Shirt
A blank t-shirt from the US Blanks line, offered in 8 colors in size XS. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing and DTG printing
- 100% combed and ringspun cotton at 4.3 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 8— Navy
Navy
Asphalt
Brown
Cream
Heather Grey
Laker Purple
Silver
White
Available sizes
Availability — Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% combed and ringspun cotton
- Fabric weight
- 4.3 oz/yd²
- Fabric type
- jersey
- Yarn
- combed · ring-spun · 30 singles
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XS
- Colors
- 8
- Country of origin
- United States
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Excellent
High-cotton smooth knit is the ideal DTG substrate.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XS.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 1/2 | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | ||
| Chest Width (Laid Flat) | 19 1/2 | 20 1/2 | 21 1/2 | 23 | 24 1/2 |
Fabric and construction
Manufacturer highlights
- 4.3 oz./yd², 100% combed and ringspun cotton jersey, 30 singles
- Heather Grey: 90/10 cotton/poly
- Heather Charcoal: 50/50 cotton/poly
- Relaxed retail fashion fit
- Shoulder-to-shoulder taping
- Side seams
- Double needle stitching on sleeves and bottom hem
- Satin label
Country of origin
Made in United States.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 100% combed and ringspun cotton
- · Similar weight (4.3 vs 4.3 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (4.5 vs 4.3 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (4.3 vs 4.3 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (4.2 vs 4.3 oz)
- · Also Excellent for screen printing
Terms used on this page
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Retail Fit
- Retail fit is a softer, slimmer, side-seamed T-shirt style built to drape and feel like a mall-brand shirt rather than a boxy promotional blank.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.
- Double-Needle Stitching
- Double-needle stitching sews two parallel rows of lockstitch, usually 1/4 inch apart, along hems and sleeve openings so the seam allowance stays flat and resists unraveling.