Shown: Black/ Mod Grey/ White
Under ArmourStyle 1389612 · More Styles
Men's Motivate 3.0 Short Sleeve Half-Zip
A blank garment from the Under Armour line, offered in 3 colors and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 87/13 polyester/elastane at 4.6 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black/ Mod Grey/ White
Black/ Mod Grey/ White
Midnight Navy/ White
Mod Grey/ White
Available sizes
Availability — Black/ Mod Grey/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | Limited | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 87/13 polyester/elastane
- Fabric weight
- 4.6 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–2XL
- Colors
- 3
- Country of origin
- Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 29 | 29 1/2 | 30 | 31 | 32 | 33 | 34 |
| Chest Width (Laid Flat) | 21 | 22 1/2 | 24 | 25 1/2 | 27 | 28 1/2 | 30 |
| Sleeve Length | 10 1/4 | 10 1/2 | 10 3/4 | 11 | 11 1/4 | 11 1/2 | 11 3/4 |
Fabric and construction
Manufacturer highlights
- 4.60 oz./yd²., 87/13 polyester/elastane
- UA Storm technology repels water without sacrificing breathability
- Lightweight stretch-woven fabric is durable and comfortable
- Generous half-zip front makes for easy layering
- Front pouch pocket
- Interior locker loop for easy hang up
- Pad-printed label
About this blank
Under Armour products purchased must be resold only with embellishment. Sale of Under Armour on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Viet Nam.
Shown for the Black/ Mod Grey/ White colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 87/13 polyester/elastane
- · Similar weight (4.6 vs 4.6 oz)
- · Covers S–4XL
- · Same fabric: 87/13 polyester/elastane
- · Covers M–3XL
- · Same fabric: 87/13 polyester/elastane
- · Similar weight (4.9 vs 4.6 oz)
- · Covers S–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Half-zip
- A half-zip is a pullover with a front zipper reaching roughly to mid-chest, longer than a quarter-zip but stopping short of a full zip.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.