Shown: Jade
UltraClubStyle UC500 · Dress Shirts & Wovens
Men's Bradley Performance Woven Shirt
A blank woven shirt from the UltraClub line, offered in 4 colors in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 92/8 polyester/spandex woven at 4.7 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Jade
Jade
Navy
Silver
White
Available sizes
Availability — Jade
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 92/8 polyester/spandex woven
- Fabric weight
- 4.7 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XL
- Colors
- 4
- Country of origin
- Bangladesh
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XL.
Garment measurements in inches, laid flat.
| Measurement | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|
| Body Length | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 | 34 1/2 |
| Chest Width (Laid Flat) | 22 1/2 | 24 | 26 | 27 1/2 | 29 1/2 |
| Neck Circumference | 18 | 18 3/4 | 19 3/4 | 20 3/4 | 21 1/2 |
| Sleeve Length | 34 1/2 | 35 1/2 | 36 1/2 | 37 1/2 | 38 1/2 |
Fabric and construction
Manufacturer highlights
- 4.7 oz./yd², 92/8 polyester/spandex woven
- Active fit
- Stretch performance
- Moisture-wicking performance
- Spread collar with collar stand
- Dyed-to-match pearlized buttons
- Adjustable cuffs with button placket
- Left-chest pocket
- Side vents
Country of origin
Made in Bangladesh.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (4.3 vs 4.7 oz)
- · Also Excellent for sublimation
- · Covers S–3XL
- · Similar weight (5 vs 4.7 oz)
- · Covers S–2XL
- · Similar weight (4.4 vs 4.7 oz)
- · Covers XL–5XL
- · Similar weight (4.4 vs 4.7 oz)
- · Covers S–5XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Collar stand
- A collar stand is the reinforced band between the neckline seam and the collar fold that holds a shirt or polo collar upright instead of collapsing flat.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.