Shown: Charcoal/ Navy
Women's Cavalry Twill Performance Polo
A blank polo from the UltraClub line, offered in 2 colors and sizes XS–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 4.4 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Charcoal/ Navy
Charcoal/ Navy
Charcoal/ Black
Available sizes
Availability — Charcoal/ Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Inventory Unavailable | — | |
| XL | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.4 oz/yd²
- Fabric type
- twill
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–XL
- Colors
- 2
- Country of origin
- Egypt
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat twill surface reduces DTG detail.
Embroidery
Excellent
Structured twill holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–XL.
Garment measurements in inches, laid flat.
| Measurement | XS | XL | 3XL |
|---|---|---|---|
| Body Length | 24 1/2 | 28 | 29 1/2 |
| Chest Width (Laid Flat) | 18 1/4 | 23 3/4 | 27 3/4 |
| Sleeve Length | 15 | 17 1/4 | 18 1/2 |
Fabric and construction
Manufacturer highlights
- 4.4 oz./yd², 100% polyester two-tone twill
- Moisture-wicking performance
- UPF 15-39 protection
- Self-fabric collar with built-in collar stays
- Narrow open Y-neck placket for feminine look
- Side vents
- Heat-sealed label
Country of origin
Made in Egypt.
Shown for the Charcoal/ Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.4 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Twill
- Twill is a woven fabric with a diagonal rib pattern, prized for durability and used as the standard ground fabric for caps and embroidery.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.