Shown: Bright Orange
UltraClubStyle 8420 · T-Shirts
Men's Cool & Dry Sport Performance Interlock T-Shirt
A blank t-shirt from the UltraClub line, offered in 19 colors and sizes S–5XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% micro-polyester at 4 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 19— Bright Orange
Bright Orange
Bright Yellow
Charcoal
Columbia Blue
Forest Green
Grey
Military Green
Navy
Red
Royal
Sapphire
Gold
Heliconia
Ice Blue
Indigo
Jade
Maroon
Orange
Sand
Available sizes
Availability — Bright Orange
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — | |
| 5XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% micro-polyester
- Fabric weight
- 4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Athletic/Fitted
- Sizes
- S–5XL
- Colors
- 19
- Country of origin
- Cambodia
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Athletic/Fitted fit, cut for men's wear · sizes S–5XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL | 5XL | 6XL |
|---|---|---|---|---|---|---|---|---|---|
| Body Length | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 |
| Chest Width (Laid Flat) | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 | 36 |
| Sleeve Length | 18 1/4 | 19 | 19 3/4 | 20 1/2 | 21 1/4 | 22 | 22 3/4 | 23 1/2 | 24 1/4 |
Fabric and construction
Manufacturer highlights
- 4 oz./yd², 100% micro-polyester
- Athletic fit
- Moisture-wicking
- UPF 30+ protection
- Pill-resistant
- Snag-resistant
- Neck tape
- 1/4" topstitching
- Transitioning from heat-seal label to tear away label
Country of origin
Made in Cambodia.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
- Fitness →
Moisture-management fabric for active wear.
- Schools and teams →
Performance knit in 19 team colors.
Similar alternatives
- · Same fabric: 100% micro-polyester
- · Similar weight (4 vs 4 oz)
- · Also Excellent for sublimation
- · Similar weight (4.4 vs 4 oz)
- · Athletic/Fitted fit
- · Also Excellent for sublimation
- · Similar weight (4 vs 4 oz)
- · Athletic/Fitted fit
- · Also Excellent for sublimation
- · Similar weight (3.8 vs 4 oz)
- · Also Excellent for sublimation
- · Covers S–4XL
Terms used on this page
- Athletic Fit
- Athletic fit is a T-shirt pattern with a fuller chest and shoulder cut that tapers down to a narrower waist, built for muscular or broad-shouldered builds.
- Snag Resistance
- Snag resistance describes how well a fabric's yarn resists catching and pulling into a loop when it hooks on velcro, nails, or rough surfaces.
- Topstitching
- Topstitching is a visible line of stitching sewn on the outside face of a finished garment, often in contrast thread, used to reinforce edges or add styling detail.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.