Shown: Navy
Women's Cool & Dry Elite Performance Polo
A blank polo from the UltraClub line, offered in Navy in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% micro-textured polyester at 4.8 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Navy
Navy
Available sizes
Availability — Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% micro-textured polyester
- Fabric weight
- 4.8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S
- Colors
- 1
- Country of origin
- India
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S |
|---|---|
| Body Length | 26 |
| Chest Width (Laid Flat) | 17 |
| Sleeve Length | 15 1/2 |
Fabric and construction
Manufacturer highlights
- 4.8 oz./yd², 100% micro-textured polyester knit
- Feminine fit
- Anti-bacterial
- Moisture-wicking
- Flat-knit collar
- Three-button placket
- Matching shoulder panels
- Hemmed sleeves
- Side vents
- Tagless
Country of origin
Made in India.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% micro-textured polyester
- · Similar weight (4.8 vs 4.8 oz)
- · Also Excellent for sublimation
- · Similar weight (5.3 vs 4.8 oz)
- · Also Excellent for sublimation
- · Covers S–3XL
- · Similar weight (5.1 vs 4.8 oz)
- · Also Excellent for sublimation
- · Covers XS–3XL
- · Similar weight (4.7 vs 4.8 oz)
- · Also Excellent for sublimation
- · Covers XS–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Flat-knit collar
- A flat-knit collar is a separately knitted collar attached to a polo shirt as its own piece, giving a firmer stand-up shape than a cut-and-sewn collar.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Tear-away tag (tagless)
- A tear-away tag is a neck label stitched in so it pulls out cleanly, distinct from a "tagless" label that's heat-printed directly onto the fabric.