Shown: Army Heather
Threadfast ApparelStyle 321Z · More Styles
Unisex Tri-Blend French Terry Full-Zip
A blank garment from the Threadfast Apparel line, offered in 5 colors and sizes XS–S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/35/10 cotton/polyester/rayon at 13.28 oz/yd²
- Sustainability program stated by manufacturer
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
- ⚠ Only 0 of 5 colors in stock at last sync.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Army Heather
Army Heatherout of stock
Blackout of stock
Black Heatherout of stock
Charcoal Heatherout of stock
Creamout of stock
Available sizes
Availability — Army Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Out of Stock | — | |
| S | Inventory Unavailable | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/35/10 cotton/polyester/rayon
- Fabric weight
- 13.28 oz/yd²
- Fabric type
- french terry
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–S
- Colors
- 5
- Country of origin
- Pakistan
- Sustainability
- Sustainability program stated by manufacturer
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured french terry surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat french terry surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–S.
Garment measurements in inches, laid flat.
| Measurement | XS | S | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 26 | 27 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 17 1/2 | 19 1/2 | 23 1/2 | 25 1/2 | 27 1/2 | 29 1/2 |
Fabric and construction
Manufacturer highlights
- 13.28 oz./yd²., (US), 22 oz./L yd (CA), 55/35/10 cotton/polyester/rayon
- Washed French terry with smooth surface
- Unisex, retail fit
- Three-panel fully lined hood
- Dyed-to-match drawcord
- YKK print friendly covered zipper
- Pouch pockets with phone slot
- Every Threadfast product contributes to the Plant with Threadfast program
About this blank
Threadfast is a proud member of the Better Cotton Initiative (BCI). Cotton products from Threadfast support more sustainable cotton farming. Better Cotton is sourced via a system of mass balance
Country of origin
Made in Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers XS–3XL
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers XS–2XL
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers XS–3XL
- · Similar fiber mix
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- French Terry
- French terry is a midweight knit with uncut interior loops instead of a brushed nap, used for lightweight sweatshirts, joggers, and crewnecks.
- Retail Fit
- Retail fit is a softer, slimmer, side-seamed T-shirt style built to drape and feel like a mall-brand shirt rather than a boxy promotional blank.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.