Shown: Black Fleck
Threadfast ApparelStyle 103A · T-Shirts
Men's Triblend Fleck T-Shirt
A blank t-shirt from the Threadfast Apparel line, offered in Black Fleck in size M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/25/25 polyester/cotton/rayon at 4.1 oz/yd²
- Sustainability program stated by manufacturer
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
- ⚠ Only 0 of 1 colors in stock at last sync.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Black Fleck
Black Fleckout of stock
Available sizes
Availability — Black Fleck
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Out of Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/25/25 polyester/cotton/rayon
- Fabric weight
- 4.1 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- M
- Colors
- 1
- Country of origin
- China, Haiti
- Sustainability
- Sustainability program stated by manufacturer
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes M.
Garment measurements in inches, laid flat.
| Measurement | M |
|---|---|
| Body Length | 29 |
| Chest Width (Laid Flat) | 20 |
| Sleeve Length | 8 |
Fabric and construction
Manufacturer highlights
- 4.1 oz./yd²., (US), 6.8 oz./L yd (CA), 50/25/25 polyester/cotton/rayon
- Contrast color fleck yarn
- Retail fit
- Side seams
- Tear away label
- Lightly textured print friendly surface
- Every Threadfast product contributes to the Plant with Threadfast program
About this blank
Threadfast is a proud member of the Better Cotton Initiative (BCI). Cotton products from Threadfast support more sustainable cotton farming. Better Cotton is sourced via a system of mass balance
Country of origin
Made in China or Haiti.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 50/25/25 polyester/cotton/rayon
- · Similar weight (3.7 vs 4.1 oz)
- · Similar fiber mix
- · Similar weight (4.1 vs 4.1 oz)
- · Similar fiber mix
- · Similar weight (4.2 vs 4.1 oz)
- · Covers XS–3XL
- · Similar fiber mix
- · Similar weight (4.3 vs 4.1 oz)
- · Covers XS–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Retail Fit
- Retail fit is a softer, slimmer, side-seamed T-shirt style built to drape and feel like a mall-brand shirt rather than a boxy promotional blank.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- Better Cotton (BCI)
- Better Cotton (BCI) is a global training and sourcing program that improves conventional cotton farming's water, pesticide, and labor practices without requiring organic certification.