Shown: Black Heather
Women's Ella Polo
A blank polo from the Swannies line, offered in 4 colors and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 90/10 polyester/spandex at 4.3 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black Heather
Black Heather
Grey Heather
Navy Heather
White
Available sizes
Availability — Black Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | Limited | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 90/10 polyester/spandex
- Fabric weight
- 4.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Relaxed
- Sizes
- XS–2XL
- Colors
- 4
- Country of origin
- Thailand
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit, cut for women's wear · sizes XS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 23 1/2 | 24 1/2 | 25 1/2 | 26 1/4 | 27 1/9 | 27 3/4 |
| Chest Width (Laid Flat) | 16 1/4 | 17 1/2 | 18 1/2 | 19 1/2 | 20 1/2 | 21 1/2 |
Fabric and construction
Manufacturer highlights
- 4.3 oz/yd²., 145 GSM 90/10 polyester/spandex
- Moisture-management
- Butter soft
- Relaxed fit
- Inside collar stand
- Three button collar placket
- Side vent tape
- Silicon logo on center back yoke
- Responsible Supplier: this product was made in a facility that is FLA certified
About this blank
Decoration of Swannies goods relating to golf courses, golf clubs, or golf country clubs are prohibited. All events including corporate, member, or charity events hosted at golf courses, golf clubs, or golf country clubs must be cleared by Swannies Golf Apparel in advance. In addition, decoration of Swannies goods relating to colleges, universities, collegiate sports teams are prohibited unless cleared by Swannies beforehand. Swannies goods may only be sold decorated. Failing to comply with these policies may result in loss of privileges for selling the Swannies brand.
Country of origin
Made in Thailand.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 90/10 polyester/spandex
- · Also Excellent for sublimation
- · Covers XS–2XL
- · Same fabric: 90/10 polyester/spandex
- · Also Excellent for sublimation
- · Covers XS–2XL
- · Same fabric: 90/10 polyester/spandex
- · Also Excellent for sublimation
- · Covers S–3XL
- · Similar weight (4.5 vs 4.3 oz)
- · Relaxed fit
- · Also Excellent for sublimation
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Relaxed Fit
- Relaxed fit adds extra ease through the chest and body beyond a classic cut, without going as wide or long as an oversized silhouette.
- Collar stand
- A collar stand is the reinforced band between the neckline seam and the collar fold that holds a shirt or polo collar upright instead of collapsing flat.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.