Shown: Mint
Men's Springs Polo
A blank polo from the Swannies line, offered in Mint and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 44/44/12 bamboo charcoal/repreve polyester/spandex interlock at 7 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Mint
Mint
Available sizes
Availability — Mint
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 44/44/12 bamboo charcoal/repreve polyester/spandex interlock
- Fabric weight
- 7 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Athletic/Fitted
- Sizes
- S–2XL
- Colors
- 1
- Country of origin
- Thailand
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Athletic/Fitted fit, cut for men's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL |
|---|---|---|---|---|---|
| Body Length | 28 | 28 3/4 | 29 7/8 | 31 1/8 | 31 7/8 |
| Chest Width (Laid Flat) | 20 1/8 | 21 1/4 | 22 1/2 | 23 5/8 | 24 3/4 |
Fabric and construction
Manufacturer highlights
About this blank
Decoration of Swannies goods relating to golf courses, golf clubs, or golf country clubs are prohibited. All events including corporate, member, or charity events hosted at golf courses, golf clubs, or golf country clubs must be cleared by Swannies Golf Apparel in advance. In addition, decoration of Swannies goods relating to colleges, universities, collegiate sports teams are prohibited unless cleared by Swannies beforehand. Swannies goods may only be sold decorated. Failing to comply with these policies may result in loss of privileges for selling the Swannies brand.
Country of origin
Made in Thailand.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 44/44/12 bamboo charcoal/repreve polyester/spandex interlock
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Same fabric: 44/44/12 bamboo charcoal/repreve polyester/spandex interlock
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Same fabric: 44/44/12 bamboo charcoal/repreve polyester/spandex interlock
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Same fabric: 44/44/12 bamboo charcoal/repreve polyester/spandex interlock
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Interlock Knit
- Interlock knit is a double-knit fabric formed by interlocking two 1x1 rib layers back-to-back, giving a smooth, identical face on both sides.
- Athletic Fit
- Athletic fit is a T-shirt pattern with a fuller chest and shoulder cut that tapers down to a narrower waist, built for muscular or broad-shouldered builds.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Yoke
- A yoke is the separate fabric panel seamed across a shirt's upper back, and where that seam sits sets how low a back print can start.