Shown: Black

Women's Freestyle Half-Zip Pullover

A blank garment from the Spyder line, offered in 7 colors and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.

Excellent for sublimation
100% polyester at 4.1 oz/yd²

⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
⚠ DTF transfer and Embroidery: conditional — test first.

Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.

Colors 7— Black

Available sizes

XSSMLXL2XL

Availability — Black

Availability by size for the Black colorway, as of the last catalog sync
Size	Status	Local pickup (Chicagoland)
XS	Low Stock	—
S	Low Stock	—
M	Inventory Unavailable	—
L	Inventory Unavailable	—
XL	Low Stock	—
2XL	Inventory Unavailable	—

Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.

Key specifications

Fabric composition: 100% polyester
Fabric weight: 4.1 oz/yd²
Fabric type: mesh
Yarn: Not stated
Construction: Not stated
Label: Not stated
Cut for: Women's
Fit: Not stated
Sizes: XS–2XL
Colors: 7
Country of origin: China
Sustainability: Not stated

Decoration compatibility

VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.

Decoration method compatibility for this garment
Method	Rating	Notes
Screen printing	Good	Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate. Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer	Conditional	Open or slick mesh surface — adhesion varies; run a wash test first. High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing	Not Recommended	Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead. Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test. Non-flat mesh surface reduces DTG detail.
Embroidery	Conditional	Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well. Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer	Good	Standard HTV and transfers apply well at the correct temperature for this fiber mix. Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation	Excellent	High-polyester fabric accepts sublimation dye fully. Sublimation shows only on white or very light garment colors.

Screen printing

Good

Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.

Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.

DTF transfer

Conditional

Open or slick mesh surface — adhesion varies; run a wash test first.

High press heat can affect polyester — test temperature and dwell time before a full run.

DTG printing

Not Recommended

Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.

Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Non-flat mesh surface reduces DTG detail.

Embroidery

Conditional

Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.

Lightweight or performance knit — use a stabilizer/backing to prevent puckering.

Heat transfer

Good

Standard HTV and transfers apply well at the correct temperature for this fiber mix.

Use low-temperature transfer material to avoid scorch or dye migration on polyester.

Sublimation

Excellent

High-polyester fabric accepts sublimation dye fully.

Sublimation shows only on white or very light garment colors.

Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.

Fit and sizing

Fit category not stated, cut for women's wear · sizes XS–2XL.

Garment measurements in inches, laid flat.

Measurement	XS	S	M	L	XL	2XL
Body Length	23 1/2	24 1/4	25	25 3/4	26 1/2	27 1/4
Chest Width (Laid Flat)	17 1/2	18 1/2	19 1/2	20 1/2	21 1/2	23
Sleeve Length	28 1/2	29 1/4	30	30 3/4	31 1/2	32 1/4

Fabric and construction

Manufacturer highlights

4.1 oz./yd²., 100% polyester textured mesh
Modern fit
Princess seam details
Thumbhole on cuffs
Dyed-to-match reflective reverse coil zipper with Spyder logo zipper pull
Drop tail
Iconic Spyder bug on lower left front

About this blank

Spyder products purchased must be resold only with embellishment. Sale of Spyder on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.

Country of origin

Made in China.

Shown for the White colorway; origin can vary by color and production run.

Recommended applications

The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.

Similar alternatives

CORE365 CE401W

Women's Kinetic Performance Quarter-Zip Pullover

2 colors · XS–3XL

· Same fabric: 100% polyester
· Similar weight (4.5 vs 4.1 oz)
· Also Excellent for sublimation

CORE365 CE404W

Women's Market Snag Protect Mesh Colorblock Quarter-Zip Pullover

7 colors · XS–3XL

· Same fabric: 100% polyester
· Similar weight (4 vs 4.1 oz)
· Also Excellent for sublimation

CORE365 CE418W

Women's Origin Performance Pique Quarter-Zip Pullover

6 colors · XS–3XL

· Same fabric: 100% polyester
· Similar weight (4 vs 4.1 oz)
· Also Excellent for sublimation

Devon & Jones DP611W

Women's Perfect Fit™ Three-Quarter Sleeve Crepe Tunic