Shown: Black
Men's Freestyle Polo
A blank polo from the Spyder line, offered in 5 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4.1 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer and Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black
Black
Electric Blue
Platinum
Polar
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | Inventory Unavailable | — | |
| XL | Inventory Unavailable | — | |
| 2XL | Inventory Unavailable | — | |
| 3XL | Inventory Unavailable | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.1 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 5
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 | 28 3/4 | 29 1/2 | 30 1/4 | 31 | 31 3/4 |
| Chest Width (Laid Flat) | 19 | 20 1/2 | 22 | 23 1/2 | 25 | 26 1/2 |
| Sleeve Length | 17 1/4 | 17 7/8 | 18 1/2 | 19 1/8 | 19 3/4 | 20 3/8 |
Fabric and construction
Manufacturer highlights
- 4.1 oz./yd², 100% polyester textured mesh
- Modern fit
- Spyder branded 3mm buttons
- Heat-seal tape set into shoulder seams
- Side vents
- Spyder branding on back right shoulder
- Iconic Spyder bug logo on wearer's left sleeve
About this blank
Spyder products purchased must be resold only with embellishment. Sale of Spyder on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in China.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (3.8 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.1 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.