Shown: Brown/ Black
Shaka WearStyle SHHFS · More Styles
Unisex Plaid Flannel Overshirt
A blank garment from the Shaka Wear line, offered in 5 colors and sizes S–5XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing and embroidery
- 60/40 cotton/ poly at 5.9 oz/yd²
- OEKO-TEX certified facility
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Brown/ Black
Brown/ Black
Cream/ Navy
Red/ Black
Royal/ Black
Shadow/ Black
Available sizes
Availability — Brown/ Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| L | Limited | — | |
| XL | Out of Stock | — | |
| 2XL | Low Stock | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — | |
| 5XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/ poly
- Fabric weight
- 5.9 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–5XL
- Colors
- 5
- Country of origin
- China
- Sustainability
- OEKO-TEX certified facility
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–5XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 30 1/2 | 31 | 31 1/2 | 32 | 32 1/2 | 33 | 33 1/4 | 33 1/2 |
| Chest Width (Laid Flat) | 21 1/4 | 22 1/2 | 23 3/4 | 25 | 26 1/4 | 27 1/2 | 28 3/4 | 30 |
| Sleeve Length | 25 1/2 | 26 | 26 1/2 | 27 | 27 1/2 | 27 3/4 | 28 | 28 1/4 |
Fabric and construction
Manufacturer highlights
- 5.9 oz./yd², 60/40 cotton/ poly
- Heavy knitting
- Soft peach wash
- Retro vintage design
- Responsible Supplier: this product was made in a facility that is OEKO-TEX certified
Country of origin
Made in China.
Shown for the Brown/ Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (6 vs 5.9 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (5.6 vs 5.9 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (6 vs 5.9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5.9 vs 5.9 oz)
- · Also Excellent for embroidery
Terms used on this page
- OEKO-TEX Standard 100
- OEKO-TEX Standard 100 is a certification testing finished textile products for harmful substances against limits stricter than most legal requirements.