Rabbit Skins 4447 Infant Fleece One-Piece in Black — blank fleece pullover, front view

Shown: Black

Rabbit SkinsStyle 4447 · Fleece

Infant Fleece One-Piece

A blank fleece pullover from the Rabbit Skins line, offered in 10 colors and sizes 6M–24M. Cataloged on VisePrint with full fabric specs and decoration-ready details.

  • Excellent for embroidery
  • 60/40 combed ring-spun cotton/polyester at 7.4 oz/yd²
  • OEKO-TEX certified facility
  • Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.

Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.

Colors 10Black

  • Black

  • Heather

  • Mauvelous

  • Natural Heather

  • Navy

  • Red

  • Saltwater

  • Charcoal

  • Natural

  • White

Available sizes

6M12M18M24M

Availability Black

Availability by size for the Black colorway, as of the last catalog sync
SizeStatusLocal pickup (Chicagoland)Actions
6MIn Stock
12MIn Stock
18MIn Stock
24MIn Stock

Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.

Key specifications

Fabric composition
60/40 combed ring-spun cotton/polyester
Fabric weight
7.4 oz/yd²
Fabric type
fleece
Yarn
combed · ring-spun
Construction
Side-seamed
Label
Not stated
Cut for
Infant/Toddler
Fit
Not stated
Sizes
6M–24M
Colors
10
Country of origin
Pakistan
Sustainability
OEKO-TEX certified facility

Decoration compatibility

VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.

Blended fabric prints reliably; match the ink system to the dominant fiber.

  • Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
  • Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.

Compatible with this fabric type at correct press temperature and pressure.

  • Lofted fleece surface — press with slightly higher pressure for full transfer contact.

Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.

  • Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
  • Non-flat fleece surface reduces DTG detail.

Embroidery

Excellent

Midweight-plus fabric supports dense stitch counts without distortion.

  • Lofted fleece — a water-soluble topping keeps small lettering from sinking.

Standard HTV and transfers apply well at the correct temperature for this fiber mix.

Sublimation

Not Recommended

Cotton-dominant fabric does not bond sublimation dye.

Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.

Fit and sizing

Fit category not stated, cut for infant/toddler wear · sizes 6M–24M.

Garment measurements in inches, laid flat.

Measurement6M12M18M24M
Body Length21 1/223 1/225 1/227 1/2
Chest Width (Laid Flat)9 1/210 1/211 1/214 1/2
Sleeve Length8 1/291011

Fabric and construction

Manufacturer highlights

  • 7.4 oz./yd², 60/40 combed ring-spun cotton/polyester
  • Heather and Natural Heather are 55/45 combed ring-spun cotton/polyester
  • Three-end fleece
  • Ribbed collar, sleeve and leg cuff
  • Innovative Snap Tape Closure at back neck and leg opening
  • CPSIA compliant tracking label on side seam
  • EasyTear™ label
  • Responsible Supplier: this product was made in a facility that is OEKO-TEX certified

Country of origin

Made in Pakistan.

Shown for the White colorway; origin can vary by color and production run.

Recommended applications

The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.

Similar alternatives

  • · Similar fiber mix
  • · Similar weight (7.4 vs 7.4 oz)
  • · Also Excellent for embroidery
  • · Also Excellent for embroidery

View all 43 fleece

Terms used on this page

Combed Cotton
Combed cotton is fiber mechanically combed after carding to remove short fibers and debris, producing a smoother, straighter strand for finer fabric.
Polyester
Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
Heather Fabric
Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
Ringspun Cotton
Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
Fleece
Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
Ribbed Collar
A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
Rabbit Skins 4447 Infant Fleece One-Piece | VisePrint