Shown: Navy Blazer
Puma GolfStyle PG400W · More Styles
Women's Bandon Quarter-Zip Pullover
A blank garment from the Puma Golf line, offered in 2 colors and sizes S–L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 69/26/5 polyester/lyocell/spandex jersey at 5.3 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Navy Blazer
Navy Blazer
Puma Black
Available sizes
Availability — Navy Blazer
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Inventory Unavailable | — | |
| M | Inventory Unavailable | — | |
| L | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 69/26/5 polyester/lyocell/spandex jersey
- Fabric weight
- 5.3 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S–L
- Colors
- 2
- Country of origin
- Lesotho
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S–L.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL |
|---|---|---|---|---|
| Body Length | 27 5/9 | 28 | 28 1/3 | 28 5/6 |
| Chest Width (Laid Flat) | 19 2/7 | 20 2/7 | 22 1/4 | 23 5/6 |
| Sleeve Length | 32 7/8 | 33 1/2 | 34 1/5 | 35 |
Fabric and construction
Manufacturer highlights
- 5.3 oz./yd², 69/26/5 polyester/lyocell/spandex jersey
- Moisture-wicking performance
- UPF 30+ protection
- Anti-microbial properties
- Active fit
- Front placket with zipper garage
- Side vents
- Thumbhole on cuffs
- Left sleeve silicone logo
- The fiber lyocell from Lenzing® is a sustainably sourced, renewable and bio-degradable botanic fiber
About this blank
Responsible Supplier: this product was made in a facility that is GRS, RCS and FLA certified.
Puma products purchased must be resold only with embellishment. Sale of Puma products on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Lesotho.
Shown for the Puma Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 69/26/5 polyester/lyocell/spandex jersey
- · Similar weight (5.3 vs 5.3 oz)
- · Covers S–4XL
- · Similar weight (4.9 vs 5.3 oz)
- · Covers XS–3XL
- · Similar weight (5.8 vs 5.3 oz)
- · Covers XS–3XL
- · Similar weight (5.5 vs 5.3 oz)
- · Covers XS–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Lyocell
- Lyocell is a rayon-family fiber made from wood pulp using a closed-loop solvent process that recovers over 99% of its chemicals, prized for a silky, eco-friendlier finish.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Zipper garage (chin guard)
- A zipper garage, or chin guard, is a small fabric flap at the top of a zipper that shields the chin from the metal slider.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.