Shown: Dark Crimson
Men's Icon Polo 2.0
A blank polo from the Puma Golf line, offered in 8 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 76/19/5 recycled polyester/polyester/spandex at 4.42 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 8— Dark Crimson
Dark Crimson
Dark Myrtle
Deep Navy
Festive Royal
Puma Black
Slate Sky
Strong Red
White Glow
Available sizes
Availability — Dark Crimson
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 76/19/5 recycled polyester/polyester/spandex
- Fabric weight
- 4.42 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 8
- Country of origin
- Viet Nam
- Sustainability
- Recycled content; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 29 1/2 | 29 8/9 | 30 2/3 | 31 1/2 | 32 2/7 | 33 1/5 |
| Chest Width (Laid Flat) | 20 1/2 | 22 | 23 3/5 | 25 3/5 | 27 3/5 | 29 1/2 |
Fabric and construction
Manufacturer highlights
- 4.42 oz./yd², 76/19/5 recycled polyester/polyester/spandex
- Heather fabric
- Bio-based moisture-management
- Solid self-collar twin-needle edge stitching
- Forward shoulder seam
- Three button placket with contrast top button thread
- Side vents with contrast fabric tape and bar tacks
- Hem finished with a 1" turnback and double-needle topstitching
- Sleek silicone heat transfer cat branding at center back
- Responsible Materials: contains 76% recycled polyester
About this blank
Responsible Supplier: this product was made in a facility that is GRS, RCS and FLA certified.
Puma products purchased must be resold only with embellishment. Sale of Puma products on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Viet Nam.
Shown for the White Glow colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 76/19/5 recycled polyester/polyester/spandex
- · Similar weight (4.42 vs 4.42 oz)
- · Also Excellent for sublimation
- · Same fabric: 76/19/5 recycled polyester/polyester/spandex
- · Similar weight (4.42 vs 4.42 oz)
- · Also Excellent for sublimation
- · Same fabric: 76/19/5 recycled polyester/polyester/spandex
- · Similar weight (4.42 vs 4.42 oz)
- · Also Excellent for sublimation
- · Similar weight (4.7 vs 4.42 oz)
- · Also Excellent for sublimation
- · Covers S–4XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.