Shown: High Risk Red
Women's Icon Golf Polo
A blank polo from the Puma Golf line, offered in High Risk Red in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4.9 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— High Risk Red
High Risk Red
Available sizes
Availability — High Risk Red
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.9 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XL
- Colors
- 1
- Country of origin
- Viet Nam
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XL.
Garment measurements in inches, laid flat.
| Measurement | XL |
|---|---|
| Body Length | 28 |
| Chest Width (Laid Flat) | 20 2/3 |
| Sleeve Length | 15 1/3 |
Fabric and construction
Manufacturer highlights
- 4.9 oz./yd² (US), 8.2 oz./L yd (CA), 100% polyester
- Moisture-management properties
- Four-way stretch fabric for increased mobility
- Ultra-lightweight
- V-neck
- Silcone Puma Cat logo on left sleeve
About this blank
Responsible Supplier: this product was made in a facility that is GRS, RCS and FLA certified.
Puma products purchased must be resold only with embellishment. Sale of Puma products on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Viet Nam.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.9 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.9 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.8 vs 4.9 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.8 vs 4.9 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- V-neck
- A V-neck is a t-shirt collar shaped like a downward-pointing V instead of a round crew, cutting closer to the sternum and narrowing usable chest-print space.