Shown: Aluminum
Women's Marco Performance Polo
A blank polo from the Paragon line, offered in 7 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% performance polyester at 4 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 7— Aluminum
Aluminum
Black
Graphite
Navy
Red
Royal
White
Available sizes
Availability — Aluminum
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | Limited | — | |
| M | Low Stock | — | |
| L | Inventory Unavailable | — | |
| XL | Limited | — | |
| 2XL | Inventory Unavailable | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% performance polyester
- Fabric weight
- 4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 7
- Country of origin
- Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| Chest Width (Laid Flat) | 17 | 18 1/2 | 20 | 21 | 22 | 23 | 24 |
| Sleeve Length (From Center Back) | 7 | 7 1/4 | 7 1/2 | 7 3/4 | 8 | 8 1/4 | 8 1/2 |
Fabric and construction
Manufacturer highlights
- 4 oz./yd², 100% performance polyester
- Paragon Plus moisture and odor management
- UPF 30+ protection
- Wrinkle-resistant finish
- SRT - Snag Resistant Technology
- Ribbed knit collar
- Dyed-to-match buttons
- Tear away label
Country of origin
Made in Viet Nam.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% performance polyester
- · Similar weight (4 vs 4 oz)
- · Also Excellent for sublimation
- · Similar weight (4.3 vs 4 oz)
- · Also Excellent for sublimation
- · Covers XS–3XL
- · Similar weight (3.8 vs 4 oz)
- · Also Excellent for sublimation
- · Covers XS–3XL
- · Similar weight (4.4 vs 4 oz)
- · Also Excellent for sublimation
- · Covers XS–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Wrinkle Resistance
- Wrinkle resistance is a fiber blend or chemical finish that keeps fabric from creasing, letting shirts come off the shelf looking pressed and stay that way.
- Snag Resistance
- Snag resistance describes how well a fabric's yarn resists catching and pulling into a loop when it hooks on velcro, nails, or rough surfaces.
- Rib Knit
- Rib knit is a knit fabric of alternating vertical ridges that stretches and recovers far more than jersey, used for collars, cuffs, and waistbands.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.