Shown: Classic Navy
North EndStyle NE500W · More Styles
Women's Borough Stretch Performance Shirt
A blank garment from the North End line, offered in 2 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 86/14 polyester/spandex at 4.13 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Classic Navy
Classic Navy
Platinum
Available sizes
Availability — Classic Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 86/14 polyester/spandex
- Fabric weight
- 4.13 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 2
- Country of origin
- Nepal
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 25 | 25 1/2 | 26 1/2 | 27 1/2 | 28 1/2 | 29 1/2 | 30 |
| Chest Width (Laid Flat) | 18 3/4 | 19 3/4 | 20 5/7 | 22 3/4 | 24 3/4 | 26 3/4 | 28 3/4 |
| Sleeve Length | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 | 34 1/2 | 35 |
Fabric and construction
Manufacturer highlights
- 4.13 oz./yd².,140 gsm, 86/14 polyester/spandex
- Moisture-management
- Active fit
- Mandarin collar
- Hidden front placket with metal snap closure
- Self cuffs with metal snap closure
- Pucker-free taped seams
- Tunic-length hi-low hemline
- Side vents
- Stretch performance
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Nepal.
Shown for the Classic Navy colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (4.5 vs 4.13 oz)
- · Covers S–3XL
- · Similar weight (4.3 vs 4.13 oz)
- · Covers XS–2XL
- · Similar weight (4.25 vs 4.13 oz)
- · Covers XS–3XL
- · Similar weight (4.25 vs 4.13 oz)
- · Covers XS–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Mandarin collar (band collar)
- A mandarin collar, also called a band collar, is a short standing strip of fabric around the neckline with no fold and no lapel.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.